- Replaces c-clamps
- Ergonomic wood grip handle
- Lighter duty clamp for delicate projects
- Protective cap prevents damage to material
-
T-Track Products (6)
-
Auto Adjust Toggle Clamps (5)
-
Bar Clamps (13)
-
Bench Clamping Systems (1)
-
Hold Downs (2)
-
Parallel Clamps (2)
-
Track Clamps (2)
-
Out of stock
The Mighty Mini is a general-purpose clamp that does the work of a 1", 2", or 3" C-Clamp, but nine times faster. Rail size: 19/32" x 3/16"; throat depth: 2"; capacity: 4"; and nominal clamping pressure: 330 lbs. The clamp is part of Bessey's Tradesman line that features a patented nonslip locking system, greater holding power than any other clutch-style clamp, corrugated cast jaws, high quality galvanized profiled rail, and glue-resistant non-marring plastic caps. -
The Bora Pistol Grip Clamp is made of lightweight composite material with a hardened steel bar. Leaf spring-style closing mechanism produces greater clamping pressure than other similar clamps.- Hi-Tech composite body allows "Best in Class" clamping pressure
- Large soft-grip ergonomically designed handles
- Reversible head for clamping or spreading
- V-Groove clamping pads for clamping around objects
-
These sturdy auxiliary clamps slide into the T-channel of the clamp track and lock into place, turning your clamp edge into a solid vise. This allows any material you are working on to be safely held in place as you glue, sand, finish, or even go to work with your router. -
Out of stock
-
If you're planning on making a sliding jig or fixture for your woodworking shop, the INCRA Miter Slider is exactly what you need. These inexpensive aluminum runners adjust for PERFECT sliding action in any standard (or near standard) 3/4" by 3/8" miter gauge slot with just a twist of the wrist. They lock firmly in place with another twist of the wrist. Won't warp, shrink or swell like wooden runners. Includes plans for a wide variety of shop-made jigs and fixtures. Anodized aluminum for durability and beauty. Available in 18" and 24" lengths. Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and you're ready. Miter sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs. -
-
Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. The Miter Channel was designed with the same Incra quality and precision to act as the perfect guide for all of your miter needs. Each channel is constructed of hard anodized aluminum for durability with Incra's trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 1-1/8” wide, 1/2” deep groove in your table. Create a laminated fixture using 1/2” thick material on either side of the channel. The “T-Slot” design can be used in conjunction with hold-downs. Will work with any standard 3/8” x 3/4” miter bar. Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs. Works with INCRA Miter Sliders and INCRA Miter Gauges or any standard 3/8-inch by 3/4-inch miter bar. T-Slot design for hold down capability. Mounts easily with pre-drilled holes and included fasteners. Hard anodized aluminum for durability. -
-
-
Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. The Miter Channel was designed with the same Incra quality and precision to act as the perfect guide for all of your miter needs. Each channel is constructed of hard anodized aluminum for durability with Incra's trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 1-1/8” wide, 1/2” deep groove in your table. Create a laminated fixture using 1/2” thick material on either side of the channel. The “T-Slot” design can be used in conjunction with hold-downs. Will work with any standard 3/8” x 3/4” miter bar. Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs. Works with INCRA Miter Sliders and INCRA Miter Gauges or any standard 3/8-inch by 3/4-inch miter bar. T-Slot design for hold down capability. Mounts easily with pre-drilled holes and included fasteners. Hard anodized aluminum for durability.
-
If you're planning on making a sliding jig or fixture for your woodworking shop, the INCRA Miter Slider is exactly what you need. These inexpensive aluminum runners adjust for PERFECT sliding action in any standard (or near standard) 3/4" by 3/8" miter gauge slot with just a twist of the wrist. They lock firmly in place with another twist of the wrist. Won't warp, shrink or swell like wooden runners. Includes plans for a wide variety of shop-made jigs and fixtures. Anodized aluminum for durability and beauty. Available in 18" and 24" lengths. Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and you're ready. Miter sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs.
-
