- Suitable for cuts greater than 90° edges: for example, on guide rails or tank dismantling.
- Extraordinary performance thanks to 1,700 W motors with outstanding manageability at optimal power-to-weight ratio at the same time.
- Extensive user protection: Restart protection, blocking protection, overload protection, soft start.
- Cutting direction: 4 x 90°, tool-free configuration.
- Variable number of strokes.
- Tool-free rapid change system for dies and punches.
- Ergonomic handle suitable for guiding in all directions.
- Chip protection mesh in fan area.
- Wide range of accessories.
Fein BLK 5.0 – Gauge Sheet Metal Nibbler for Heavy Dismantling – 72324761090
$2,699.95
Description
Power consumption 1,700 W
Power output 1,000 W
Strokes 820 spm
Cutting speed 4.9 ft/min
[m/min]
Steel 58,000 lbf/in² 13/64 [5] in[mm]
Steel 87,000 lbf/in² 1/8 [3.3] in[mm]
Steel 116,000 lbf/in² 3/32 [2.5] in[mm]
Non-ferrous metals up to 36,000 lbf/in² 9/32 [7] in[mm]
Cutting width 5/16 [8] in[mm]
Immersion Ø with die 1-11/16 [43] in[mm]
Radius of smallest curve (inside/outside) 3-1/2 [90] / in[mm]
Cable with plug 13 [4] ft[m]
Weight 8.38 lbs
Sound pressure level LpA 85 dB
Measurement uncertainty of the measured value KpA 3 dB
Sound power level LWA 96 dB
Measurement uncertainty of the measured value KWA 3 dB
Peak sound value LpCpeak 100 dB
Measurement uncertainty of the measured value KpCpeak 3 dB
Vibration value 1 αhv 3-way 10 m/s²
Measurement uncertainty of the measured value Kα 1,5 m/s²
