Uncategorized

Out of stock

Grizzly Industrial G0487-51″ 30 HP 3-Phase Double Wide-Belt Sander

$27,600.00
Features:
Pneumatic Belt Tensioning

Digital Readout and Elevation Controls Accurate to 0.005"

Powered Table Elevation with Keypad for Typing/Storing Exact Measurements

Industrial Rubber Conveyor Belt

Micro-Adjustable Graphite/Felt Platen (Rear Drum)

Variable Feed Speeds

Disc Brake for Emergency Stops

Independent Motor Controls for Sanding Drums, Table Elevation and Conveyor
Details
Out of stock

Grizzly Industrial G0445-24″ 10 HP 3-Phase Platen Type Wide-Belt Sander

$14,500.00

The Grizzly Industrial G0445-24" 10 HP 3-Phase Platen Type Wide-Belt Sander machine was developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. The main features that enable it to process short pieces efficiently are the single drum and the double infeed and double outfeed pressure rollers that are tucked in closer to the drum. The result is that you have continuous downward pressure on extremely thin stock as short as 14" (G0582). That is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of harder rubber to prevent distortion of thin stock while sanding. The new platen model will sand stock as short as 9" (G0445). All of these models include features like digital read out, powered table elevation, four screw jacks for table support, variable speed, disc brake stopping system, dust proof photo electric eye/pneumatic control for belt oscillation, and separate motors for the drum, the feed rollers, and the table elevation.

Details
Grizzly G0603X – 25″ 15 HP 3-Phase Extreme Duty Planer w/ Helical Cutterhead

$13,999.99
G0603X 25" 15 HP 3-Phase Extreme Duty Planer w/ Helical Cutterhead

Precision planing with digital control.
The G0603X 25" 3-Phase Extreme Duty Planer has an incredible 15 HP motor to make quick work of those big planing jobs. The G0603X features a unique helical cutterhead with 170 inserts rotated at 15° for smooth shearing cuts - meaning you can say goodbye to tear-out - while having an ultra-quiet machine and a smoother finish. The digital controls to allow you to simply enter the thickness of the board you want or the amount you want to remove, which saves time and reduces waste. All controls are conveniently located. The segmented chip breaker leads directly into the dust hood with a 5” dust port to help ensure the work area stays as clear as possible. And because it's a Grizzly Extreme Series®, you can be assured that your machine will provide years of reliable service. Like all Grizzly planers, the G0603X comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0603X manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available on-line and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS:
- Cutterhead motor: 15 HP, 220V/440V*, 3-phase, 37A/18.5A
- Table elevation motor: 1/2 HP, TEFC, 2.4A/1.2A
- Table size: 25" W x 57" L
- Maximum cutting width: 25"
- Maximum stock thickness: 9"
- Maximum cutting depth: 1/4"
- Minimum stock thickness: 1/4"
- Minimum stock length: 10"
- Feed rate: 20, 25 & 30 FPM
- Cutterhead: 6-row helical, 170 inserts
- Cutterhead speed: 4900 RPM
- Power transfer: Triple V-belt
- Overall size with infeed/outfeed tables: 60-1/4"H x 57-3/8"W x 54-3/8"D
- Approximate shipping weight: 2054 lbs.
FEATURES:
- Segmented chip breaker
- Precision-ground cast-iron table
- 5" dust port
- Micro-adjustable table height
- Infeed roller is serrated steel
- Outfeed roller is finely finished steel
- Digitally controlled table elevation for extreme accuracy
- Adjustable bed rollers
- Easy access cutterhead
- 3-Speed (20,25,30) feed Rate
- Inch/metric readout
- Emergency stop button*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $250. Please contact Grizzly Technical Support at (570)546-9663 before placing your order.
Add to cart Details
Out of stock

Grizzly Industrial G9962ZX – 24″ 10 HP 3-Phase Wide-Belt Sander

$13,974.99

10 Horsepower 3-Phase 24" Wide Belt Wood Sander with Pneumatic Oscillation Control
These machines were developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. This collaboration resulted in the introduction of the G9962Z & G9962ZX, which have become the "staple" of the guitar building industry. The main features that enable these sanders to process short pieces efficiently are the single drum and double infeed and outfeed pressure rollers positioned close to the drum. The result is a continuous downward pressure on extremely thin stock as short as 9", which is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of hard rubber to prevent distortion of thin stock while sanding. Features include digital read out, powered table elevation, variable speed conveyor, disc brake stopping system, pneumatic belt tracking, pneumatic belt oscillation, and separate motors for the drum, feed rollers, and table elevation.

Details
Edwards 60 Ton Ironworker 3 Phase, 230

$13,699.00

Ironworker Max Force (Tons) 62 Oil Capacity (Gal.) 7 Speed (Strokes/Minute) 23 Throat Depth (In.) 8-7/8 5 Motor HP Hydraulic Pressure (PSI) 2500 Voltage 230 3 Phase 14 Amps Punching Station Pedestal Die Table 14 in Wide Flat Bar Shear Angle Shear Coper Notcher Metalworking

Add to cart Details
Edwards 55 Ton Ironworker 1 Phase, 230

$12,699.00

Ironworker Max Force (Tons) 50 Oil Capacity (Gal.) 7 Speed (Strokes/Minute) 23 Throat Depth (In.) 7-1/2 5 Motor HP Hydraulic Pressure (PSI) 2500 Voltage 230 1 Phase 23 Amps Punching Station Pedestal Die Table Flat Bar Shear Angle Shear Universal Open Tooling Station Metalworking

Add to cart Details
Out of stock

JET MBS-1018-1, 10″x18″ Horizontal Dual Mitering Bandsaw, 2HP, 230V 1PH (413411)

$8,999.00
- Adjustable Hydraulic Downfeed: Control is easily adjusted to enable feed rates to evolve with variable materials.
- Magnetic Starter: Low voltage and lost phase protection.
- Added Safety: Automatic blade breakage sensor detects accidental breakage and interrupts the power.
- Extended Blade Life: Steel plate base contains a 4-gallon coolant system.
- Easy Clean Up: Integrated pressurized wash hose.
- Self-Propelled Blade Brush: Prevents chip build up in the blade guides.
- CSA/CUS Certified: This machine follows strict guidelines and electrical requirements.
Details
Out of stock

Powermatic 1510007 511 Vertical Panel Saw

$8,599.99

Details
Grizzly Industrial G0544-20″ 5 HP Pro Spiral Cutterhead Planer

$8,555.00

Add to cart Details
Grizzly G0709 – 14″ x 40″ Gunsmithing Gearhead Lathe

$8,199.99
G0709 14" x 40" Gunsmithing Gearhead Lathe

An accurate and powerful lathe.
What makes the G0709 14" x 40" Gunsmithing Gearhead Lathe a "gunsmithing" lathe is that it comes with features typically not found on standard lathes, such as the high-precision NSK bearings, extra-large 1-9/16" spindle bore and a "spider" mount system. The spider mount system has four brass-tipped screws that stabilize long shafting and rifle barrels through the outboard end of the spindle. Supplied with a 2 HP motor, the 8-speed gearhead of the G0709 produces spindle speeds from 70-2000 RPM. The tailstock lock system features a drive hub, which allows you to use a 1/2” torque wrench to clamp the tailstock in place at a pre-determined torque setting. This ensures consistent draw-down alignment every time, even with multiple lathe operators using the machine. The G0709 features a foot brake that also acts as a safety device and can bring the machine to an instant stop. The G0709 also comes with a D1-5 spindle, a 200 series quick change tool post, flood coolant system, LED work light, and a pull-out chip tray. Like all Grizzly gunsmithing lathes, the G0709 comes with a 1-year warranty covering parts and assuring the unit is free from factory defects. (Consumables are not covered by the warranty.) The G0709 manual was written by our U.S. based Documentation Department and is packed with useful information. The complete and easy to read manual makes it easier to assemble and maintain your lathe. The Grizzly Technical Support team is U.S. based. Parts and accessories for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.
SPECIFICATIONS
- Motor: 2 HP, 220V, single-phase, 10A
- Swing over bed: 14"
- Distance between centers: 40"
- Swing over saddle: 13-13/16"
- Swing over cross slide: 8-13/16"
- Spindle bore: 1.57" (40mm)
- Spindle nose taper: MT#5
- Spindle nose: D1-5 Camlock
- Spindle speeds: 8, 70-2000 RPM
- Carriage travel: 36"
- Cross slide travel: 6-11/16"
- Tailstock barrel taper: MT#3
- Tailstock barrel travel: 3-15/16"
- Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H
- Approximate shipping weight: 1550 lbs.
FEATURES
- Easy-to-use lever controls
- Hardened and ground cast-iron bed
- Cuts 4-112 Standard TPI and 0.1-7 Metric
- Cuts LH threads
- On/off reverse switch on carriage
- Socket for tailstock lock
- Cast aluminum gear cover
STANDARD EQUIPMENT
- 6" 3-Jaw chuck with reversible jaws
- 8" 4-Jaw chuck with independent jaws
- 11" face plate
- Steady rest/follow rest
- Full length splash guard
- Quick change tool post with 2 tool holders
- (2) MT#3 dead centers (1 carbide tipped)
- (1) MT#3 live center
- (1) MT#5 - MT#3 sleeve
- Pull out chip pan
- 1/2" drill chuck w/ MT#3 arbor
- Toolbox
Add to cart Details
Sale!

Grizzly Industrial G9933-3 HP Three Spindle Shaper

~~$8,590.00~~ $7,999.90

This 3 sided, heavy-duty shaper will pay for itself quickly in cabinet and production shops that normally require several shapers or time consuming cutter changes. The combinations of cutters and set-ups you can utilize on this machine are endless.

Add to cart Details
Out of stock

Baileigh Drum Sander 7.5 HP 1018920

$7,436.99
- Built for industrial 8-hour shifts.
- Massive 37”-wide and 6”-high maximum capacity.
- Thickness sander with a minimum of ⅛” allows you to tackle a wide range of projects.
- 7.5 hp motor drives 2 steel drums.
- Hard durometer rubber coating on drums ensures a flat, mar-free finish.
- Independently adjustable rear drum makes fine-tuning easy.
- Cast iron table incorporates 4 solid jackscrews.
- Conveyor belt provides a great grip on your material.
- ¼ hp variable-speed feed motor lets you adjust between 3.7 and 14.2 surface feet per minute.
- DRO shows the thickness of your material, so you can reach the exact result you want.
- Dual drums allow you to use 2 different grits at once—first to take off thickness, then to smooth out the finish.
- Quick clamp changeover system for attaching sanding paper to your drums saves you time and effort.
- Our large sander's thick steel base prevents vibrations. Most other companies’ machines are not so heavily and rigidly built.
- Cabinet in the base provides a great place to store your extra belts.
- 2 dust ports can hook up to your dust collector and help maintain high air quality in your shop.
- Large orange safety brake lets you immediately stop the machine when necessary.
- Covered by a 1-year parts warranty.
- Replacement drum sander parts are in stock at our Wisconsin headquarters, so we can get them to you quickly.
- We include lifetime technical support by phone from a team of reps with hands-on machine experience.
Details