Call Us Today! 1.888.566.7879|oldpowderkeg@msn.com

Incra

//Incra
  •   If you're planning on making a sliding jig or fixture for your woodworking shop, the INCRA Miter Slider is exactly what you need. These inexpensive aluminum runners adjust for PERFECT sliding action in any standard (or near standard) 3/4" by 3/8" miter gauge slot with just a twist of the wrist. They lock firmly in place with another twist of the wrist. Won't warp, shrink or swell like wooden runners. Includes plans for a wide variety of shop-made jigs and fixtures. Anodized aluminum for durability and beauty. Available in 18" and 24" lengths. Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and you're ready. Miter sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs.  
  • Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. The Miter Channel was designed with the same Incra quality and precision to act as the perfect guide for all of your miter needs. Each channel is constructed of hard anodized aluminum for durability with Incra's trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 1-1/8” wide, 1/2” deep groove in your table. Create a laminated fixture using 1/2” thick material on either side of the channel. The “T-Slot” design can be used in conjunction with hold-downs. Will work with any standard 3/8” x 3/4” miter bar. Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs. Works with INCRA Miter Sliders and INCRA Miter Gauges or any standard 3/8-inch by 3/4-inch miter bar. T-Slot design for hold down capability. Mounts easily with pre-drilled holes and included fasteners. Hard anodized aluminum for durability.
  • Why trust the operation of your Incra Miter Gauge or Miter Slider in just any miter track. The Miter Channel was designed with the same Incra quality and precision to act as the perfect guide for all of your miter needs. Each channel is constructed of hard anodized aluminum for durability with Incra's trademark gold finish. Mounting is easy with pre-drilled holes and included fasteners; simply cut a 1-1/8” wide, 1/2” deep groove in your table. Create a laminated fixture using 1/2” thick material on either side of the channel. The “T-Slot” design can be used in conjunction with hold-downs. Will work with any standard 3/8” x 3/4” miter bar. Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs. Works with INCRA Miter Sliders and INCRA Miter Gauges or any standard 3/8-inch by 3/4-inch miter bar. T-Slot design for hold down capability. Mounts easily with pre-drilled holes and included fasteners. Hard anodized aluminum for durability.
  •   If you're planning on making a sliding jig or fixture for your woodworking shop, the INCRA Miter Slider is exactly what you need. These inexpensive aluminum runners adjust for PERFECT sliding action in any standard (or near standard) 3/4" by 3/8" miter gauge slot with just a twist of the wrist. They lock firmly in place with another twist of the wrist. Won't warp, shrink or swell like wooden runners. Includes plans for a wide variety of shop-made jigs and fixtures. Anodized aluminum for durability and beauty. Available in 18" and 24" lengths. Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and you're ready. Miter sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs.  
  • Out of stock
    INCRA Miter1000 HD Miter Gauge INCRA Miter1000 HD Miter Gauge
    • 180 Angle LOCK Indexing Stops with 1-Degree Step Spacing and Special Stops at ±22-1/2-Degree
    • Patented Glide LOCK Miter Bar Expansion Disks Provide a Perfect Fit
    • Heavy Duty Machined and Laser Cut Components. Patented Incremental Flip Shop Stop for Prefect Cut Length Control
    • 1/10th-Degree Vernier Cursor, Telescoping Fence Expands from 18-Inch to 31-Inch Overall Length
    • Removable Retaining Clip for T-Slot Miter Channels
  • The INCRA I-Box is the most advanced tool ever produced for creating a stunning variety box joints & finger joints. Its revolutionary design allows faster setup, greater versatility, and improved user safety compared to traditional jigs. At the same time, it's easy to use and the included 1-hour instructional DVD covers everything from basic setup to advanced decorative joinery. The I-Box is an evolutionary leap forward from conventional box joint methods - this single jig can be used on both your table saw and your router table, and the IBox's dual pitch lead screw mechanics easily micro-adjust joint tightness and provide a whopping 1/8-Inch - 3/4-Inch range of pin widths. It's capable of making good fitting box joints using any width cutter within that range into lumber from 1/4-Inch to 1-Inch thick. The advantages continue far beyond the basics: I-Box-exclusive joints like the Center Keyed Box Joint can be used to produce symmetric patterns rather than ending your joint with a partial pin as often required with other traditional box joint jigs. The Splined Box Joint is yet another INCRA-only decorative joint that's guaranteed to add wow-factor to your projects, and the I-Box can even be used to produce an unlimited variety of classic dentil mouldings.
  • This combination of two great INCRA crosscutting tools is incredibly practical and convenient. When mounted to the Miter Express, the Miter1000SE can easily crosscut 24"-deep panels, offers the increased control of using a sled, and allows great safety for cutting small parts using the Miter Express' heavy duty hold down clamp and T-slots that easily accommodate shop-made jigs and fixtures. The Miter 1000SE can also be removed from the Express sled in seconds and used by itself for quick solutions to a variety of operations, such as working at a router table or cutting bevels with the saw blade tilted. The Miter Express & Miter 1000SE Combo offers versatility not available anywhere else at a price that makes it a fantastic value!